Photo Count: 9-
RENTAL PRICE:
Call for Price -
Location:
Shakopee, Minnesota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2023 Other Crusher - Impact I-120RS
Fields with asterisks * are required.
Print This Page
Description
IMPACT CRUSHER
Inventory ID
E00066029
Serial
TRX120RSKOMP62035
Machine Status
Equipment is on rent
Contact your Salesperson for more information
Contact your Salesperson for more information
Details
- Inventory ID: E00066029
- Status: On Rent
- Make: Other
- Model: I-120RS
- Year: 2023
- Serial#: TRX120RSKOMP62035
Notes
- FINLAY I-120RS TRACKED IMPACT CRUSHER EQUIPPED PER THE BELOW:
- ENGINE:
- - TIER 4 FINAL/STAGE IV: SCANIA DC9 257 KW (350 HP ENGINE)
- IMPACT CHAMBER:
- - TEREX CR038 IMPACT CHAMBER
- CHAMBER:
- - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
- - MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
- - 4 BAR ROTOR - MATENSITIC BLOW BARS 2 HIGH AND 2 LOW
- - DIRECT DRIVE VIA CLUTCH
- - DRIVE BELT TENSIONER WHEEL
- - BLOW BAR LIFTING TOOL SUPPLIED
- - DRIVE PULLEY TO SUIT HIGHER SPEED RANGE
- - SMALLER DRIVE PULLEY FITTED TO GIVE LOWER CHAMBER SPEED RANGE. STANDARD PULLEY
- STILL DISPATCHED WITH MACHINE
- - ROTOR FITTED WITH 2 FULL MARTENSITIC CERAMIC & 2 LOW MARTENSITIC BLOW BARS
- HOPPER & FEEDER:
- - VGF FIZED HOPPER
- - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
- - MESH APERTURE ON GRIZZLY FEEDER: 38MM
- - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
- - BLANKING MAT FOR VGF
- - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
- BLANKING MAT. 50 MM CASSETTE SPACING & 38 MM MESH AS STANDARD.
- - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
- - PRE-SCREEN PUNCH PLATE SPACING 63MM
- MAIN CONVEYOR:
- - 1100MM (43.3") BELT FULL LENGTH
- AUXILIARY:
- - HYDRAULIC RAISE/LOWER MAGNET
- CONVEYORS:
- - PIPED FOR OVER BAND MAGNET
- - BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELT DISCHARGING TO RHS OF THE MACHINE
- - TWIN POLE OVERBAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
- DICHARGE CHUTE DISCHARGING TO RHS OF THE MACHINE
- RS COMPONENTS:
- - 3.66M X 1.52M
- - 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
- DECKS
- - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
- FOR STOCKPILING OVERSIZE MATERIAL
- - 1400MM (55") WIDE BELT FINES CONVEYOR
- - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY
- - BELT WEIGHER
- - ADDITIONAL TRANSFER & STOCKPILE CONVEYOR FOR COLLECTING MATERIAL FROM EACH
- INDIVIDUAL DECK OF SCREEN BOX. GIVING MIDDLE GRADE PRODUCT - ONLY AVAILABLE
- WITH RH BYPASS CONVEYOR
- CLIMATE SPECT:
- - STANDARD OILS- (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30
- DEGREES CELSIUS)
- DUST SUPPRESSION:
- - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS - LESS PUMP
- ELECTRICAL:
- - EMERGENCY STOPS
- - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
- MOVEMENT
- - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
- GENERAL:
- - SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE ITIS THE END USERS
- RESPONSIBILTIY TO HAVE GUARDING INSPECTED WITH COMPLIANCE.